Online Training
Sign up for an online training program you can take any time and any where you have an internet connection.
-
Fundamentals #2: How to Test Overcurrent Relays: An Introduction to Protective Relaying (32 NETA CTDs)
$499.95 Add to cartThis seminar covers the basics of overcurrent protection that new relay testers should know before they start testing relays. It will also fill in gaps for self-taught relay testers who had to figure it out for themselves and want to truly understand how to test all overcurrent relays from any manufacturer with any test-set.
You will learn everything Chris Werstiuk knows about overcurrent relay testing over the following lessons:
- Introduction to Protective Relays
- How to Test Electro-Mechanical Overcurrent Relays
- Understanding Power System Faults
- How to Test Simple Digital Overcurrent Relays
- Introduction to the Power System Studies Used to Create Relay Settings
- How to Test Overcurrent Elements in IEDs
This course is eligible for 32 NETA Continuing Technical Development Credits (CTDs). NETA Certified Technicians (Level III and Level IV) are required to earn a minimum of 48 CTDs every three years to maintain their certification. For more information about the CTD program and requirements, please contact the NETA office at neta@netaworld.org or 888-300-6382.
-
Fundamentals #4: How to Test Voltage Elements Inside IEDs/Relays (16 NETA CTDs)
$399.95 Add to cartThe How to Test Voltage Protection in IEDS/Relays Online Training Seminar is the last seminar in our Relay Testing Fundamentals Online Training program– which shows you how to connect, understand, and test Over- and Under-Voltage elements in IEDs/Relays with Wye, Open-Delta, and Broken Delta connections. This seminar also sets you up to test more advanced element tests with detailed information about three-phase, phase-to-phase, and phase-to-ground faults and symmetrical components.
This new seminar has the following lessons:
- Lesson 1: Introduction to Voltage Transformers (PTs or VTs)
- Lesson 2: How to Test OverVoltage (59-Element) Protection Inside an IED/Relay
- Lesson 3: Symmetrical Components for Relay Testers
- Lesson 4: How to Test UnderVoltage Elements (27)
- Lesson 5: How to Test IEDs/Relays With Delta PT Connections
- Lesson 6: How to Test IEDs/Relays With Wye/Broken-Delta VT Connections
-
Fundamentals #3: How to Test Protective IEDs/Relays (16 NETA CTDs)
$399.95 Add to cartThis online protective relay testing seminar follows Chris Werstiuk (author of The Relay Testing Handbook) as he shows you the basic skills you need to test any digital relay with any modern test-set. Learn how to test protective relays with online videos that are broken down into logical chunks that you can watch at any time and in any order so that you can fit this series into your busy schedule.
Sign up today and earn 16 NETA CTDs!
-
Fundamentals #1: Phasor Drawings for Relay Testers (4 NETA CTDs)
$49.95 Add to cartWaveform diagrams contain every detail of an electrical system, but that information can be difficult to understand without a lot of effort. Phasor drawings take the complex information embedded in waveform drawings and convert it into phasor diagrams so that you can see the most important information about an electrical system at a glance. Understanding phasor drawings is probably one of the most important skills that a relay tester must have to be successful!
Take this course to learn these topics:
Understanding Phasors and Creating Phasor Drawings- What Are Phasors?
- How to Draw Phasor Diagrams
- Drawing Phasors with Different Scales
Create and Understand Phasor Diagrams Used by Different Relay and Test-Set Manufacturers
- Drawing Phasors with Lagging Angles (Megger and GE SR)
- Draw Phasors with Positive Angles (Doble and Manta Test Systems)
- Draw Phasors with Negative Angles (GE UR)
- Draw Phasors with Positive and Negative Angles (Omicron and SEL)
