Isolate the Relay from the System

Lesson

Isolate the Relay from the System

Isolate the Relay From the System

The first thing we need to do is isolate the relay from the system. ┬áThese two videos will introduce you to Westinghouse/ABB/States FT Style test switches and then show you the correct order to follow when isolating the relay so that you don’t inadvertently cause a trip or alarm.

These steps will help you make sure the relay is looking in the right direction and is properly configured for the power system it’s connected to.

If you skipped the introduction videos, you will need to watch the introduction video for this topic (click here to jump to it) before you will be issued a certificate.

Post a comment

Leave a Comment